Best Podcast Microphones For Great Audio (All Budgets)

By Ross Winn. Originally published here and updated January 2, 2022

Photo by Terrillo Walls on Unsplash

---

You’re starting a podcast and are wondering “what’s the best microphone for podcasting?”

The good news is that for most people, that answer is easy: get the ATR2100x-USB here.

But where things can get a little tricky is when you need to record multiple people, or maybe you want something a bit more on the pro end.

Don’t worry though, we’ll try to make it easy (and not list 300 different options that just make you more confused) so you can get what you need and get back to podcasting!

The first thing you need to know is there are two ways to connect a podcast mic to your computer: USB and XLR.

USB is fast and easy to set up and great if you only need to record one microphone at your location.

Remote guests are fine, but you’ll want to avoid USB if you need to record 2 or more people locally.

XLR connections require additional equipment to connect them to your computer, but the sound quality is better. You’ll also be able to connect more than one mic at the same time.

Now that we have that cleared up, here are the best podcasting microphones – we’ll start with USB and then go into XLR:

Best USB Podcasting Mics

These USB mics are great for lower budgets or those that want the easiest way to start a podcast in 2022.

ATR2100x-USB

I’ve recommended the Audio-Technica ATR2100-USB in many other articles and now there is a new version! The ATR2100x-USB updates the quality and now uses USB-C.

It performs well above its price point, has both USB and XLR connections, and is small enough to travel with if needed.

Samson Q2U

The Samson Q2U is basically the same mic as above. I’ve had reports that you can’t seem to get the ATR2100 outside the US, so this is what I would get if that’s the case.

It comes with a stand, windscreen, USB and XLR cables.

Rode NT-USB

The Rode NT-USB is a cardioid mic (ideal for voice recording) that comes with a pop filter, tripod, boom mount, a 20′ USB cable, and a travel pouch.

Best XLR Podcasting Mics

Most people will want a dynamic mic, especially if you are recording multiple people in the same studio, so that’s what you’ll find in this section. We do have a separate article on condenser microphones if you’re interested in learning more about what’s available.

Rode PodMic

The Rode PodMic is my favorite XLR podcasting mic under $100.

This dynamic cardioid mic has an internal pop filter and shockmount to help get the best audio quality in a simple and small package.

You’ll want to get a boom arm for the best results.

Rode Procaster

I actually have 3 of these and love them. The Rode Procaster does tend to need a little extra gain to not sound noisy.

When compared with other mics, the frequency range of 75Hz – 18kHz doesn’t seem like it quite compares but the results have been great.

Heil PR-40

The Heil PR-40 is used by many top podcasters.

Its price point puts it just below the higher-end mics below, but the sound quality and specs more than compare.

You’ll get a 28Hz – 18kHz frequency response, internal shockmount and pop filter, and a padded case for safe transport.

Shure SM7B

You’ll find the Shure SM7B in Joe Rogan’s podcast studio – as well as many others.

This is a classic broadcasting mic and performs really well. With a built-in shockmount and pop filter, and a frequency range of 50Hz – 20kHz, you’ll never need to upgrade or get additional accessories.

You will need a Cloudlifter or preamp to power the SM7B as it is notoriously “gain-hungry”.

Electro-Voice RE20

The Electro-Voice RE20 is another classic broadcasting mic. It has a feature called Variable-D that gives you some flexibility with your mic technique, making it great for both beginners and pros.

Mobile Podcasting Mics

Planning to podcast on the go? There are several small mobile mics that sound much better than any built-in microphone you might have.

There are also some great iPhone mics and Android mics if you want to go that route as well.

Samson Go Mic

The Samson Go Mic is a great cheap podcasting mic (under $30) and is designed for travel.

It can clip to your laptop or simply sit on your desk, folds up small, and can switch between cardioid and omnidirectional pickup patterns.

Comes with a travel case and USB cable.

Blue Snowflake

The Blue Snowflake is another cheap podcasting mic (also under $30) designed for use on the go.

It can be used on top of a laptop or on a desktop, folds into itself for compact carrying, and comes with a USB cable.

Final Recommendations

What about the Blue Yeti? Well, it’s not really the best choice for podcasting. We do list the Blue Yeti as a top choice for gaming and streaming mics, but when it comes to podcasting, you’ll want something that minimizes background noise.

Other great podcasting microphones not highlighted above include the Audio-Technica BP40, Telefunken M82, and MXL BCD-1 (these are all dynamic mics with XLR connections).

The best mic for podcasting is the one you have with you, so don’t let our recommendations stop you from recording if you don’t have exactly what we recommend.

Every podcaster has different needs and varying quality of recording space, so don’t be afraid to experiment and see what works for you! 

---

Article By Ross Winn

Ross Winn is the founder of Podcast Insights, the industry-leading podcast education site. He has helped thousands of people start and grow a podcast and loves to test out new gear and software.

How podcasting is revolutionizing communications

Article originally posted here

---

The human voice is said to be one of the world’s most persuasive communication tools.

Perhaps this is why many people believe we are in the midst of a podcast revolution.

Since podcasting consists of audio broadcasting on the internet, it is in the powerful position to combine the persuasiveness of voice communication with the dominance of online interactions over our daily lives.

Unlike traditional radio news and broadcasting which was once the apex of audio communication, podcasts have the huge advantage of being listened to at any time at the listener’s convenience.

Indeed you can listen to podcasts on your computer, smartphone, tablet or other portable device, and you can subscribe to podcasts much like you subscribe to blogs.

Podcasts Benefit Both Listeners and Hosts 

Podcasts have become a powerful source of specialized information on numerous categories, and many of today’s podcast hosts are effectively positioning themselves as subject-matter experts.

The popularity of podcasting has surged in recent years according to most estimates. Some sources gauge the number of current podcasts to be in the hundreds of thousands and growing.

Compelling Podcasting Facts

Here are 10 things to know about this growing communication tool and the influence it is having on how we get our information:

1. While audio files have been around for decades, the first actual podcast is said to have debuted in 2003.

2. The term “podcasting” was introduced in 2004 by The Guardian newspaper in the U.K.

3. George W. Bush was the first US president to deliver his weekly address as a podcast in 2005.

4. Podcast listenership grows an estimated 23 percent+ year over year.

5. Some estimates indicate more than 80 million Americans listen to podcasts every month.

6. Today it’s estimated there are more than 700,000 podcasts available online, a number that continues to grow.

7. The most popular podcast categories are: religion, music, comedy, TV & film, literature, and news & politics.

8. The average podcast is 22 minutes in length and provides a new episode once a week.

9. 64 percent of podcasts are listened to on a smartphone, tablet or other portable device, rather than a computer.

10. Podcasts attract a relatively young audience; the median age of a podcast listener is 30.

Sources: CopyBlogger / PodcastInsights

Podcasters Are the New Influencers

Hiring an influencer can be expensive, and you only reach people on social media. Being on a podcast allows you to network and be seen across social media and search engines.

By Morissa Schwartz October 18, 2021 (Originally published here)

Photo by Kate Oseen on Unsplash

Hiring influencers can get expensive for startups. You pay them and give them free products. They post about it on their social media, and you go on your merry way and hope that their audience sees it and acts.

Most reputable podcasts, on the other hand, don’t charge you to be on their show, and if one does ask you for money, nine times out of ten, run! Podcasts typically have a substantial audience comparable to many influencers or micro-influencers. Additionally, your audience and theirs get to learn more about you and your business straight from you.

How do podcasts work? 

On podcasts, you typically give about 30 minutes of your time interviewing with the host, talking about yourself and your business. The podcaster will post about the episode with a link to you and your business on his or her social media, where it will be available forever, whereas many influencers post a story that disappears after 24 hours. Podcasters also typically publish a short blog about the interview with the interview link or video on their website and backlink to you. This provides you with valuable SEO juice that will allow more organic users to find your website. 

You can and should also share this interview on your own website and social media. There’s great creative content for your audience that you don’t have to make or have a marketing team create, which means more time and money saved. This is especially great for B2B companies that are bootstrapping. 

Perks of being a guest on a podcast 

Being on a podcast is an excellent alternative to paying an influencer because not only are you saving the money you'd pay an influencer, but you also get more marketing fodder out of it. You get the basic 360 — SEO, social media and PR — all for the price of being a guest on a podcast. In other words, being a podcast guest is a powerful thing. 

Many people think it’s intimidating, but it’s just like the networking conversations so many business owners have. Podcasts are great for networking. Most of the hosts are also business owners, and I’ve even become friends with a lot of the podcast hosts that I’ve talked to. If you have ever been to a card exchange, done a sales call, or spoken to others at a business event, you can speak on a podcast.

Besides, at a business event, there is no edit button, whereas on a podcast, you can usually take solace in the fact that if you stumble, it can always be edited out.

How often should I go on podcasts?

I’m a big proponent of going on many different podcasts. Personally, I interview on about two podcasts per week. Each show is different. I have gotten so many followers this way. My Domain Authority for my business has gone up, and there are many Google results when a potential client searches my name.

I have also gotten many great new clients who have heard me on these podcasts. They hear me on the podcast and say, “I feel like I know you. I love what they do. I am ready to hire you.” I hardly have to tell them anything about my company because they already know it from the show. It happens often — and not just to me. I also have helped dozens of clients secure regular podcast spots and have seen the same results across various niches and industries. 

Podcasts have been a game changer for so many people. It could work for business-to-consumer (B2C), but it especially works for business-to-business (B2B). So if you are a B2B looking to get out there more and inexpensively advertise your product with 360, being on a podcast is the way.

Audacity Tutorial - 17 Essential Podcast Recording and Editing Tips

This article was originally posted here.

Audacity is an amazing program, but the price tag is even better.

Podcasters like you - beginners and pros alike - can use Audacity to edit your podcast to make it sound professional and help you captivate listeners.

Despite Audacity’s strong points, sometimes it isn’t the most intuitive program. Though, after you’ve got the hang of it, you’ll see that the features make it worth the learning curve.

Now, before we start - remember, remember to save a copy of your podcast before you import it into Audacity.

How to Set Up Your Podcast for Success

#1: Get Audacity to recognize your mic

The show can’t start unless your recording program recognizes your microphone. Here are the step-by-step instructions to get Audacity connected to your mic:

On a Mac (OS X)

1. Go to System Preferences from the little Apple logo at the top left of your desktop. Click on Sound.

2. Click on the Input tab, and select the microphone you are using from the available options. Finally, adjust the input volume levels as necessary.

3. Open Audacity on your Mac. Make sure that Audacity is set up to recognize your microphone. Click Audacity in the main menu then Preferences.

4. Click Devices, and make sure that the selected microphone under Recording > Device is set your external microphone.
   
   Note: Make sure to plug in your recording device first, and then turn on the program. If you turn on Audacity before plugging in your microphone, Audacity won’t be able to see it.

5. Test your microphone by pressing the record button and recording a quick audio snippet. It can be something random like “This is a test, this is only a test” or something like that.

In Windows:

1. Get Windows to recognize your microphone. Go to the control panel and access sound settings.

2. Click on “change system sounds or manage audio devices”. Select your microphone under audio input devices. Check and adjust audio input properties to improve sound quality, by adjusting levels.

3. Open Audacity and make sure that Audacity is set up to recognize your microphone. First, go to the Edit menu.

4. Check your Preferences and Settings for Audio I/O. Make sure that the selected microphone (recording device) is set for your microphone.
   
   Note: If you turn on Audacity before plugging in your microphone, Audacity won’t be able to see it. Make sure to plug in your recording device first, and then turn on the program.

5. Test your microphone by pressing the record button and recording a quick audio snippet.

#2 Using pop filters

Recording a studio-quality podcast is easier than you think. The first step is using a good pop filter. These simple devices improve your sound quality by limiting the *pop* sound and excessive puffs of air (plosives) your voice makes when you speak naturally.

Some podcasters speak into the side of their mic to minimize noise, but a pop filter is an economical option that will give you great results.

How to use your pop filter: 

1. Choose a good NYLON pop filter. Metal ones are out there, but not as effective. Expect to pay roughly $25. You don’t want to use a windscreen as a pop filter - they aren’t the same.

2. Attach the filter following the manufacturer’s directions.

3. Speak into the mic - not to the side of it. Try to remember to reign in your ‘p’s, ‘b’s, and ‘d’s. No matter how good your pop filter is, those sounds may get past it.

Tip: Try playing back some audio recordings with and without the pop filter to hear the difference.

#3: Check your levels before you start recording

You can check your levels in two places - from your main computer setting and from Audacity. We recommend using Audacity for a more accurate reading.

Here’s how to check your levels:

1. Choose your recording device from the Device toolbar.

2. Use the Mixer Toolbar to adjust your recording levels.

3. Keep your maximum peak levels around -6dB in order to leave some space for editing.

Note: If you don’t see the recording volume slider in Audacity, you might need to tell your operating system or sound card to let you set the volume from Audacity.

Perfecting the Sound of Your Podcast

#4: Use a fade in or fade out to give professional polish to your podcast

A clean fade in and fade out, will give your podcast episode a polished and professional feel.

1. Highlight the section of the audio track you want to fade in or out.

2. Under the Effect menu,

3. Select either Fade In or Fade Out.

Tips: Use a longer fade out than your fade in. For a more professional sound, consider using a Studio Fade In or Studio Fade Out, which smooths the sound and varies slightly in speed. It’s a popular effect for music recordings.

If you want your intro or outro to continue for a longer period of time at a reduced volume level, apply an adjustable fade over the selected section and vary it to meet your needs. If you’d like to fade between two tracks, use the Crossfade tool.

#5: Use chains to combine effects and save your settings

Chains are used for either Batch Processing or Effects Automation. Audacity ships with a single chain included. If you find yourself using the same effect over and over, chains are the ideal way to speed up your workflow.

1. Identify the techniques you use for every podcast.

2. Write down the sequence of these techniques.

3. Consider including an audio file (like your intro or outro) as part of your chain using the Export WAV command.

4. Create your chain by selecting File >> Edit Chains >> Add.

5. Add commands and set parameters for each technique you want to apply in the chain.

6. Click Ok to exit.

7. To apply a chain, click File >> Apply Chain. Click the right option to apply the chain to either the entire project or specific files.

#6: NEVER edit in MP3 format

MP3 is an amazing sound format that is great for keeping file sizes small while still preserving sound quality. But it is a delivery format, so you shouldn’t be using it while editing.

Use your native file format (WAV or AIFF) to edit for better results. Then you can export as an MP3 after you have your episode in it’s final form.

#7: Save a copy of your episode, before you start making changes

The changes you make in Audacity are irreversible. If you accidentally delete a section of your audio, or ruin the sound, you can kiss the original goodbye. That’s why you always want to save a copy of your audio file before importing it into Audacity.

#8: Create an EQ setting to repair plosives

Not sure what a plosive is?

Try saving this three times fast - "Peter Piper picked a patch of pickled peppers."

The popping p’s are plosives. Even if you have a pop filter like we recommend in Tip #2 some plosives might still sneak into your recording.

You can use this tip to minimize their effects:

1. Highlight the problematic section of your recording.

2. Open Effect and select Equalization.

3. You should see a flat line. If not, click Flatten.

4. Starting roughly at 160 Hz, set a curve the drops from the midline gradually by intervals of 2dB, with the last four set to -20dB.

5. Save this curve with a title you can remember, like Plosive Fixer.

6. Click Ok, and watch the highlighted section correct itself.

7. To adjust multiple sections, click Repeat Equalization under the Effects menu.

8. Finally, listen to the section again to see check the changes the equalization has made to your sound file.

Use Amplify, Compress, and Normalize … in the Right Situations

It’s easy to get carried away with the wide array of editing and processing effects in Audacity, but too much of a good thing is exactly that - too much. The following Audacity tutorial tips will help you get the best sound from your recordings by using three of the most popular techniques in the right circumstances.

#9: Using Amplify

1. Check your audio track for peaks or dips that fall outside your ideal volume levels.

2. Apply the amplify technique with a positive number if you are aiming to increase a dip, and by a negative number if you need to decrease a peak. You can do this by clicking Effect >> Amplify.

3. Remember: You do NOT want to use Amplify if DC offset is present, and you do NOT use Amplify if you are using a chain.

#10: Using Compress

1. If your entire track is filled with peaks and dips, apply this technique to the entire track to bring the levels closer together.

2. Use this technique carefully. It can leave a track sounding too flat if overdone.

3. Highlight the portion of your track that you’d like to compress. Then click Effect >> Compressor.

#11: Using Normalize

1. Apply this technique to bring the gain of the entire track to its max without clipping.

2. Note: If DC offset is present, you can and should use Normalize with DC Offset Correction.

3. Never normalize multiple tracks that include intentional variations in peak volume, because you’ll lose the effect.

4. Highlight the audio you’d like to change. Then click Effect >> Normalize.

#12: Truncate Silence

Nobody wants a bunch of dead air in the middle of their podcast. Use this tip to remove some of the silences to keep your podcast episode flowing:

1. Highlight your audio track.

2. Click Effect >> Truncate Silence.

3. Set your Operation mode to Truncate Detected Silence.

4. Set your Level to the appropriate level; anything that falls below this will be deleted.

5. Choose the Duration that a pause must last for in order to be considered silence. Silences that last longer than this amount of time will be ignored. Periods of 10 seconds are good candidates for truncation.

6. Set the Truncate control to 2-5 seconds.

7. Set Compress to 50 percent.

#13 Remove The Snakesssss

If your podcast is plagued by hissing, don’t worry you can eliminate it.

Remove excessive ‘s’ sounds with a D-esser plugin like Digital Spit Fish D-esser, or you can do it from within Audacity by following these simple steps.

NOTE: This tip works best if you are editing a podcast with significantly higher intensity on your s’s.

1. Select and Duplicate the control track.

2. Put your control track into Waveform dB.

3. Identify the dB barrier that most of your track falls below, but your s’s go above.

4. Auto Duck the selected audio, most likely between -18dB and -20dB. The maximum pause and fade in and fade up lengths should be significantly shorter than normal (0.1 seconds max).

#14: Use keyboard shortcuts during playback to save time

Audacity includes many keyboard shortcuts that can take time to discover. Use this cheat sheet to see all the shortcuts in Audacity.

During playback, the following shortcuts are the ones you’ll need on hand. Courtesy of Midnight Music (PDF).

• Start playback → Space bar

• Stop playback → Space bar

• Listen to a selection → Space bar

• Play up to selection → B

• Record → R

• Append record (add recording to the end of the current track) → Shift+R

• Pause → P

• Skip to start - move playback cursor to beginning → Home

• Skip to end - move playback cursor to end → End

• Move playback cursor a little right/left (while stopped) → Right/left arrow

• Loop play - play selection over and over → Shift+space

• Preview a cut - play 1 second before and after a selection → C

• Skip playback cursor back one second during playback → Left arrow

• Skip playback cursor forward one second during playback → Right arrow

• Skip playback cursor back 15 seconds during playback → Shift+Left arrow

• Skip playback cursor forward 15 seconds during playback → Shift+Right arrow

#15: Whatever you do, don’t overdo the effects

With noise reduction, compress, truncate silence, etc. You’ve got a lot of toys to play with. It’s better to use these effects in moderation. If they are overdone your podcast can be left sounding uninviting and artificial.

#16: Add intro and outro music with studio-quality sound

Create separate intros and outros instead of recording them with each episode. You can import them as audio files later, and save yourself plenty of time and hassle in the process. Using prerecorded stock or royalty-free audio is usually a good option.

How to add an intro or outro with Audacity:

1. Find audio you can use legally.

2. Import the audio by clicking File >> Import >> Audio.

3. Use Tip #4 to fade your music in and out.

#17: Export to the highest quality

After you’ve got your episode sounding exactly how you want you want, you’ll want to export it in the best delivery format. We’d recommend exporting as an MP3 (Constant, 256 kbps, Joint Stereo?) or Ogg Vorbis (Quality 8).

Tip: Think twice before exporting in .AU. Windows does not support .AU so we don’t recommend using it.

Now that you’ve learned the basics, get out there and start podcasting! Remember that while pro-quality sound is important, it’s the content of your podcast that is going to win you listeners.

What Is The Best Time To Release A Podcast?

Originally published here by the Podcastle Team

Aug 17, 2021, 4 min read

Have you ever noticed that the amount of likes on your IG photo differs depending on where you posted it? It works better at certain days or hours, and those “magical” days and hours are what bloggers constantly try to identify.

The same mechanism works for podcasts. It’s not only enough to have a quality podcasting episode. You should also know the best time to release a podcast so that it grasps as much attention as it really deserves.

Of course, the phenomenon of “the best time” is highly subjective. It largely depends on your chosen niche and your target audience.

So, don’t expect to see below the calendar days marked in red as the best time to release a podcast. Instead, you will receive some advice on what you should consider when choosing the podcasts’ release time.

Morning is usually a great idea

 There is a rule of thumb that posting your podcasts in the mornings (usually around 5AM) can positively impact the number of listeners it reaches. There are several reasons for that.

1. Morning posts increase the likelihood that your podcast will be put at the top of your listeners’ feeds during the day. This works for different podcasting platforms, including Apple Podcasts, Spotify, Google Podcasts, etc.

2. Posting in the morning ensures there will be less time lag between your posting and the actual appearance of the podcast in the feeds. Podcast directories post content from the RSS feeds by regularly refreshing them. Therefore, the sooner you upload your podcast, the sooner your chosen directory will publish it.

3. Early morning is also beneficial because it works in different time zones. If you post a podcast, let’s say, at 5 am, this will work both for West and East time zones. Therefore, you will have chances to reach more awake listeners.

Try to tie it to something more predictable

Understanding when your audience will be more ready to listen to your podcasts can be too abstract at times. That’s why we recommend you link it to more trackable things, such as the events and happenings that might trigger your audience to listen to your podcast.

Depending on your chosen niche, that might not always be possible. However, suppose you are recording podcasting-discussion on the Olympic Games, for example. In that case, the best time to release a podcast will be right after the games, when your audience is too emotional on that topic and is eager to listen to it.

In such cases, you might have to record a podcast on the spot. If you find that you don’t have time to go to a professional studio and spend hours post-processing the footage, here’s how to start a podcast at home and produce your episode faster.

Try to fit your podcast’s idea in the vibe of the specific weekday

There are different life routines, but the general flow is usually the same. At the beginning of the week, we seem to be motivated to organize everything better and plan things. In the middle of the week, we are close to tired and try to plan the fun times of the weekend. Finally, Friday is Friday, with its almost never-changing vibe of freedom, no matter which plans we have for the next two days.

Therefore, organize your podcast posting schedule depending on which vibe it carries to the audience.

On Monday, it would be a good idea to share something informative and motivational. The examples include podcasts on practical tips to start your morning or week, the effective practices of managing everything at work, and similar.

The closer it is to the mid of the week, the less informative podcasts are recommended to post. That’s because people are more tired, and they want to have more fun rather than informative content. That’s why on Wednesdays or Thursdays, you can choose to post something fun: comedy, Hollywood news, new music releases, etc.

Avoid times when your audience will hardly listen to your podcast

Which are those times?

It’s when there is certain “breaking news” happening in the community you target your podcast. When your potential listeners are too shocked or simply interested in a certain hot topic, you’d better not bother them with something that doesn’t fit at the moment.

For example, suppose there are days of national celebration, where most of your listeners celebrate and have fun. In that case, it might be a good idea to temporarily hold your podcast about sad and alarming topics like disappearing species of animals or global climate change.

We do not mean there are no chances that the podcast can attract many listeners. However, it’s more likely that people will not prefer something that makes them worry when they want to have fun or take vacations.

Don’t post at the time others do

Players in different industries mimic each other’s strategies, and in the majority of cases, that’s normal. Your competitors accumulate significant experience, so why not utilize it?

However, that should not be the case when deciding the scheduling of your podcasts.

As mentioned earlier, the right scheduling for your podcast episodes is very subjective. Your competitor’s scheduling strategy might fit their target audience’s specific behavior, but not that of yours.

Therefore, you’d better rely on either the analysis of your target audience or your logic and test different schedules until you find the one with the best performance.